Welcome to V-TUF
You have no items in your shopping cart.
Filters
Search
Close

UNLOADER VALVES

View as Grid List
Sort by
Display per page

UNLOADER 1 KIT - for bypass back to tank

C0.081KITRT unloader kit for bypass back to tank. This is popular on engine driven machines to prevent over heating of the bypass water and pump damage if the unit is left running in bypass for longer periods of time. - The outlet port of the unloader is 3/8 female BSP (To convert to M22 male, order code: B14.1114 M22M x 3/8M adaptor) - The inlet to the filter is 1/2 female BSP (Suggested optional adaptors: MB8/MB12/NP 1/2m x 3/4m or MH08/12 1/2m x 3/4 brass tail) - The tail on the bypass takes 1/2 hose (suggested hose order code: BF1225 WASHFLEX PRO - 25m coil) - this full kit consists of: C0.082 + MH06/08 + MB6/MB8 + W6(x2) + MB6/FB8 + P13.6511AL
£139.00 incl tax

UNLOADER 2 - BANJO VT for VT5 VT6 VT3 VT4 PUMP

'OptiSpare’ Universal Banjo Unloader Valve with inlet filter and chemical injector:
  • Max Pressure: 250 bar / 3700 psi
  • Flow Rate: 30 L/min
  • Max Water Temperature: 150°C
  • Body: Brass
  • Inlet: 1/2”F BSP or 3/4”F BSP (Compatable coupling to suite: MH12/08 or MH12/12 BRASS HOSE TAIL – 3/4” BSP MALE x (1/2 or 3/4”) TAIL or B1.134 KCQ DURAKLIX LP MALE COUPLING 3/4" M THR
  • Outlet: 3/8”F BSP with MSQ Quick Release (Compatable coupling to suite: B14.9191 or B14.9191SS MSQ DURAKLIX H.P QR MALE PLUG 3/8F)

    Banjo Bolt-on type Unloader Valve:

    Annovi Reverberi Pumps:
  • XT Pumps
  • XM Pumps
  • XR Pumps
  • HPE Pumps

    Comet Pumps:
  • FW Pumps

    Bertolini Pumps:
  • TW Pumps
  • TML Pumps
  • TWE Pumps
  • VML Pumps

    IMPORTANT SAFETY NOTE: BEFORE powering the system:

    Step 1: the unloader valve MUST be set at MINIMUM pressure;
    Step 2: The bypass port MUST be open;
    Step 3: Then set the unloader to the required pressure (which MUST be LESS than the maximum unloader pressure of the unloader valve AND LESS than the maximum pressure of your equipment);
    Step 4: Set the locking nut/s so this pressure (the running pressure and the lock line pressure) cannot be exceeded.

    CAUTION: This is high pressure equipment and if the above safety and set up rules are not followed, serious damage to equipment and injury to humans can occur. The caps and joints can be blown clean out of their threads which cause dangerous projectiles. Please be free to ring 01522 787978 if you need any assistance
  • £163.06 incl tax

    UNLOADER 6 - BANJO FOR XHD160

    Unloader for XHD160 pressure washer (or similar) - continuous running type. M22M outlet port; 1/2M (plastic) inlet port; Chemical injection with adjustment.
    £141.95 incl tax
    Close