Welcome to V-TUF
You have no items in your shopping cart.
Filters
Search
Close

FOAM - OPTI EQUIPMENT

View as Grid List
Sort by
Display per page

FOAM INJECTOR - OPTI BLUE - FIXED DOSE

AB000 BLUE OPTI FOAM Injector (machines 16 to 20 litres per minute) - 3/8M x 3/8M. Please read the Important notes and Trouble Shooting tabs by scrolling down this page.
£95.15 incl tax

FOAM INJECTOR - OPTI RED - ADJ. DOSE

AR000 RED OPTI FOAM Injector with adjustable chemical dosage control (machines 11 to 16 litres per minute) - 3/8M x 3/8M. Please read the Important notes and Trouble Shooting tabs by scrolling down this page.
£105.50 incl tax

FOAM INJECTOR - OPTI RED - FIXED DOSE

AR000 RED FOAM Injector (machines 11 to 16 litres per minute). Please read the Important notes and Trouble Shooting tabs by scrolling down this page.
£100.72 incl tax

FOAM INJECTOR SPARE - CHEM TAIL KIT (FIXED DOSE)

Chemical inlet Repair kit for OPTI-FOAM injector. This is the replacement kit if your injector is back-feeding to the detergent tank. The old ordering code: OPF015
£8.64 incl tax

FOAM LANCE - OPTI 1000mm BLUE - QR (HFLOW)

FOAM LANCE GUIDE: ARSOO5B BLUE FOAM LANCE is known to give up to 50% thicker foam then some of its competitors. The inlet of the lance is the KTQ type quick release coupling made to fit triggers with the KTQ quick release type coupling. The ARSOO5B BLUE FOAM LANCE is normally used with Blue AB000 and White AW000 injectors. ARSOO5B BLUE FOAM LANCE is sometimes used with Red AR000 injectors too, where the foam lines are longer then usual. Note: Care must be taken that no sediment goes down the entrance to a foam lance – so store it wisely. If you are experincing any trouble shooting, please study the trouble shooting notes below (Stroll down the page)
£151.07 incl tax

FOAM LANCE - OPTI 1000mm RED - QR

FOAM LANCE GUIDE: ARSOO5R RED FOAM LANCE is known to give up to 50% thicker foam then some of its competitors. The inlet of the lance is the KTQ type quick release coupling made to fit triggers with the KTQ quick release type coupling. The ARSOO5R RED FOAM LANCE is normally used with YELLOW AY000 and RED AR000 injectors. Note: Care must be taken that no sediment goes down the entrance to a foam lance – so store it wisely. If you are experincing any trouble shooting, please study the trouble shooting notes below (Stroll down the page)
£151.07 incl tax

FOAM LANCE - OPTI 300mm STUBBY NO INJECT. - 1/4F

OPF060 300mm opti-foam lance is normallly used in areas with restriced space. The OPF060 must be used with and Injector such as the AR000 RED foam injector or YELLOW AW000 foam injector. The inlet is 1/4 male BSP thread.
£95.92 incl tax

FOAM LANCE - OPTI 300mm STUBBY NO INJECT. - QR

OPF061 300mm opti-foam lance is normallly used in areas with restriced space. The OPF061 must be used with and Injector such as the AR000 RED foam injector or YELLOW AY000 foam injector (depending on the flow rate of your pressure washer). The inlet is the KTQ male quick release spigot.
£112.15 incl tax

FOAM LANCE - OPTI 300mm STUBBY WITH INJECT. - 1/4F

OPF070 300mm opti-foam lance is normallly used in areas with restriced space. Note: Your movement is restricted too as you are 'tied' to the chemical container by the chemical line. The OPF070 has its own inbuilt injector which means that you do NOT need order an injector for this to work. The inlet is 1/4 male BSP thread.
£134.28 incl tax
Close