Welcome to V-TUF
You have no items in your shopping cart.
Filters
Search
Close

ENGINES & MOTORS

View as Grid List
Sort by
Display per page

ELECTRIC MOTOR - LOW REV. 110V, 'H' SHAFT, 3HP

An industry proven 110 volt hollow shaft motor. This must be fitted with a pump before operation:
  • 110 Volts - 50 Hz
  • 3.0 Hp, 2.2 kW, 29.0 Amps
  • 1450 Rpm - 4 pole
  • 24mm hollow shaft
  • 100L frame - Foot mount
  • Flange hole size 7mm and distance between centres 52.5mm
  • With standard mounting flange for pumps : XHDM151 ; XHDM161
  • Die cast dark aluminium housing
  • Rated to IP54
  • Capacitor size: 1 x 60yf + 1 x 70yf , both with leads
  • 23 Kg
  • Please note: Due to product development, specifications can change without prior notice. Images are for illustration purposes only. E&OE
  • £450.00 incl tax £835.20 incl tax

    ELECTRIC MOTOR - LOW REV. 240V, 'H' SHAFT, 3HP

    An industry proven 240 volt hollow shaft motor this must be fitted with a pump before operation:
  • 240 Volts - 50 Hz
  • 3.0 Hp, 2.2 kW, 13.0 Amps
  • 1450 Rpm - 4 pole
  • 24mm hollow shaft
  • 100L frame - Foot mount
  • Flange hole size 7mm and distance between centres 52.5mm
  • With standard mounting flange for pumps : XHDM151 ; XHDM161
  • Die cast dark aluminium housing
  • Rated to IP54
  • Capacitor size: 1 x 70yf with lead
  • 23 Kg
  • Please note: Due to product development, specifications can change without prior notice. Images are for illustration purposes only. E&OE
  • £396.00 incl tax £753.60 incl tax

    ELECTRIC MOTOR - LOW REV. 415V, 'H' SHAFT, 5HP

    An industry proven 415 volt hollow shaft 5.5HP motor which must be fitted with a pump before operation:
  • 415 Volts - 50 Hz
  • 5.5 Hp, 4.0 kW, 8.7 Amps
  • 1450 Rpm - 4 pole
  • 24mm hollow shaft
  • IEC 100L frame - foot mount
  • Flange hole size 9mm and distance between centres 61mm - please ask for you require a different flange, as the flange size of the MH.243 can fit this motor too
  • With standard mounting flange for pumps : XHDM300 ; XHDM350 ; XHDM400
  • Die cast dark aluminium housing
  • Rated to IP54
  • IE1 rated
  • 26 Kg
  • Please note: Due to product development, specifications can change without prior notice. Images are for illustration purposes only. E&OE
  • £420.00 incl tax £753.60 incl tax

    ELECTRIC MOTOR - LOW REV. 415V, 'H' SHAFT, 7.5HP

    An industry proven 415 volt hollow shaft 7.5HP motor which must be fitted with a pump before operation:
  • 415 Volts - 50 Hz
  • 7.5 Hp, 5.5 kW, 12.2 Amps
  • 1450 Rpm - 4 pole
  • 24mm hollow shaft
  • IEC 112 frame - foot mount
  • Flange hole size 9mm and distance between centres 61mm
  • With standard mounting flange for pumps : XHDM300 ; XHDM350 ; XHDM400; XHDM450
  • Die cast dark aluminium housing
  • Rated to IP54
  • IE1 rated
  • 33 Kg
  • Please note: Due to product development, specifications can change without prior notice. Images are for illustration purposes only. E&OE
  • £474.00 incl tax £927.18 incl tax

    ENGINE - DIESEL V-TÜF 10HP 'EcoFectiv'

    V-TUF EcoFective TM LONCIN DIESEL 1" horizontal shaft ENGINE is built to confirm to European regulations. The engine comes fitted with starter motor and key start for electric start. The leads and battery is a separate purchase. The engine can be pull started too.
    “More power with less emissions”
  • Less noise – quieter running
  • Low carbon emissions = Low Carbon Technology *Environmentally Friendly* Complies with European EPA Phase III emission regulations
  • More power
  • Increased fuel efficiency
  • Auto decompression – Ease of starting
  • Cold start feature (this will function if connected to a battery) – ease of starting in cold weather.
  • Proven reliability – currently known as one of the most reliable engines on the market
  • Cost effective spares availability
  • Good looking engines with quality components
  • Engines set at optimum running speed for decreased wear, increased power and longer lasting engines.
  • Strong efficient and simple to service engines
  • All V-TUF engines are lubricated with PRESSURE LUBE PL500 – more power, longer lasting, decreased friction & decreased wear
  • Suitable for VT4 & VT6 PUMPS

    To pull-start the V-TUF EcoFective TM DIESEL ENGINE:
  • Step 1: Secure the throttle in starting mode
  • Step 2: Pull the pull cord 4 times slowly.
  • Step 3: Pull the pull cord firmly and faster
  • Step 4 : if the engine doesn’t start – repeat steps 1 to 3 (this may need to be done a few times if the engine is cold – but once you see the initial white puffs coming out the exhaust, you know the engine should be ready to run.)
  • £918.00 incl tax £1,356.23 incl tax

    ENGINE - DIESEL V-TÜF 7HP 'EcoFectiv'

    V-TUF EcoFective TM LONCIN DIESEL 1" horizontal shaft ENGINE is built to confirm to European regulations. The engine comes fitted with starter motor and key start for electric start. The leads and battery is a separate purchase. The engine can be pull started too.
    “More power with less emissions”
  • Less noise – quieter running
  • Low carbon emissions = Low Carbon Technology *Environmentally Friendly* Complies with European EPA Phase III emission regulations
  • More power
  • Increased fuel efficiency
  • Auto decompression – Ease of starting
  • Cold start feature (this will function if connected to a battery) – ease of starting in cold weather.
  • Proven reliability – currently known as one of the most reliable engines on the market
  • Cost effective spares availability
  • Good looking engines with quality components
  • Engines set at optimum running speed for decreased wear, increased power and longer lasting engines.
  • Strong efficient and simple to service engines
  • All V-TUF engines are lubricated with PRESSURE LUBE PL500 – more power, longer lasting, decreased friction & decreased wear
  • Suitable for VT4 & VT6 PUMPS
  • £792.00 incl tax £1,920.00 incl tax

    ENGINE - PETROL HONDA 13HP C/W OIL ALERT 1"HS

    An industry proven GENUINE RED HONDA GX390QX 13HP petrol engine with horizontal 1 inch horizontal shaft.
  • 13.0 Gross Hp
  • 11.7 Net Hp (SAE J1349)
  • 9.4 Cont. rated Hp @ 3600 rpm
  • Air cooled 4-stroke OHV engine
  • Oil alert & recoil start
  • 1" parallel key horizontal shaft
  • 6.1 L fuel tank capacity
  • 3.5 L/h fuel consumption @ 3600 rpm
  • 1.1 L oil capacity
  • 406L x 460W x 448H (mm), 31.7 Kg
  • Pumps to suite this engine: VT4; VT6 ; XHDM450 with Gearbox (RL400)
  • Ideal oil for this engine: V-TUF PRESSURE LUBE PL500
  • Please note: Due to product development, specifications can change without prior notice. Images are for illustration purposes only. E&OE
  • £990.00 incl tax £2,242.73 incl tax

    ENGINE - PETROL HONDA 5.5HP C/W OIL ALERT 3/4 HS

    An industry proven GENUINE RED HONDA GX160 5.5HP petrol engine with horizontal ¾ inch horizontal shaft.
  • 5.5 Gross Hp
  • 4.8 Net Hp (SAE J1349)
  • 3.9 Cont. rated Hp @ 3600 rpm
  • Air cooled 4-stroke OHV engine
  • Oil alert & recoil start
  • 3/4" parallel key horizontal shaft
  • 3.1 L fuel tank capacity
  • 1.4 L/h fuel consumption @ 3600 rpm
  • 0.6 L oil capacity
  • 312L x 362W x 346H (mm), 15 Kg
  • Pumps to suite this engine: VT3; VT5
  • Ideal oil for this engine: V-TUF PRESSURE LUBE PL500
  • Please note: Due to product development, specifications can change without prior notice. Images are for illustration purposes only. E&OE
  • £594.00 incl tax £1,024.80 incl tax

    ENGINE - PETROL HONDA 8HP C/W OIL ALERT 1" HS

    An industry proven GENUINE RED HONDA GX240QX 8HP petrol engine with horizontal 1 inch horizontal shaft.
  • 8.0 Gross Hp
  • 7.9 Net Hp (SAE J1349)
  • 6.1 Cont. rated Hp @ 3600 rpm
  • Air cooled 4-stroke OHV engine
  • Oil alert & recoil start
  • 1" parallel key horizontal shaft
  • 5.3 L fuel tank capacity
  • 2.2 L/h fuel consumption @ 3600 rpm
  • 1.1 L oil capacity
  • 381L x 428W x 422H (mm), 25.8 Kg
  • Pumps to suite this engine: VT4; VT6
  • Ideal oil for this engine: V-TUF PRESSURE LUBE PL500
  • Please note: Due to product development, specifications can change without prior notice. Images are for illustration purposes only. E&OE
  • £906.00 incl tax £1,649.65 incl tax

    ENGINE - PETROL V-TÜF 15HP - LOW EMISSIONS

    £954.00 incl tax £1,074.24 incl tax

    ENGINE - PETROL V-TÜF 7HP - LOW EMISSIONS

    £474.00 incl tax £724.80 incl tax

    FILTER - AIR - FOR ECOFECTIV DIESEL ENGINE

    Diesel engine air filter dimensions of sealing flange: 167mm x 172mm x 8mm. Suitable for VLCD07 & VLCD10 Ecofectiv diesel engines.
    £44.84 incl tax
    Close